HANNAHONG Mini PIR Motion Sensor Switch,AC110-220V, Smart Human Body Activated Detection,Time Delay Adjustable, Infrared Induction Detector for Wall LED Light, Strip,Ceiling Lamp Switch

Product Description

Add Motion Sensing Anywhere

The Wire-Free Motion Sensor triggers and Switches to turn on and light up whenever someone enters the room.

Widely places where the sensor suitable to use

Assembled it in Bedroom

It will be a nice usage when you assemble the sensor detector in your bedroom

Works good with a Security Light

It’s great to use to control the security light in your yard.

Assembled it in Stockroom

After installing the sensor switch, the light will automatically turn on when the movement of personnel or goods is detected; During periods of inactivity, the lights automatically turn off.

Easy to control a door way light

When people come, the door way light will turn on automatically and turn off when people leave.

Motion Sensor Light Switch

Specification :

Load power: ≤40WWorking Voltage: 100-240VInduction angle:front110°Best Sensing distance:2-5M3-Way time delay: 15 seconds, 45 seconds, 5 minutes adjustableMode setting:dark(≤2Lux),dim(≤25Lux),all day(2000Lux)Installation height:≥3.5MWaterproof rating:IP22Working temp: -20 ℃ -+40 ℃Induction principle: infrared human body induction Application lamps:LED lighting ,ceiling lamps,panel lights,floodlights ,etc.

Adjustable switch

There are three photosensitive modes and delay time to be selected to meet the needs of lighting under various conditions

Wiring mode of the product

The above includes two wiring methods. It should be noted that the maximum power carried by this product is less than 40W. Exceeding this power will cause the product to fail to operate normally

Installation diagram

Please confirm whether the voltage is appropriate before purchasing.If the voltage does not meet the requirements, the product will not workproperly and may damage the product Select a suitable position for installation according to the sensing range and angle of the product to avoid being insensitive or unable to sense due to exceeding the rangeInstallation height of up to 3 meters, flexible sensing at 120 degrees

Effect description of product induction

Daytime

In the daytime or when there is enough light, the induction will not be triggered if there is someone or no one passing by（Except under the option of Allday）

Nighttime

It can be sensed normally at night. After the personnel leave, the light will go out automatically according to the time delay you set. When someone passes by again, the induction will be triggered again

Nighttime

In the case of insufficient light at night, the lamp will not turn on automatically when there is no similar human characteristics, and will only turn on when it senses the human body

Nighttime

If someone stays still in the sensing area for a long time, the switch will also turn off the light according to the set delay.It doesn’t mean that if people are always within the sensing range, the lights will be on all the time

Functional Features: Connect the Mini PRI Motion sensor Switch with the light, it can turn on automatically when people or animal enter the detect range and shut off when they leave. Very convenience and save energy.
Small Size: The PIR motion sensor switch has feature of small size and lightweight, easy to install and operate in room or cabinet, plug and play. The Mounting Hole Diameter: is 25mm/0.98inch. Widely Suitable for auto lighting corridors, stairs, bathrooms, basements, warehouses, garages, closet light.
Wide Input Voltage: The input voltage of the switch is AC85-265V. It can be used under both 110 or 220 input voltage. Load Power :≤40W ；Best sensing distance:3-5M
Adjustable Delay Time: There are 3 delay time can be selected, 15 seconds, 45 seconds, 5 minutes adjustable .In addition to the automatic control of LED lights, it can also be used to control exhaust fans, doorbells or other devices.
Easy Assembly: There are 4 wires ,Red line is Live wire (L); the outermost blue line is Neutral wire (N);Yellow line and inside blue line connect to light bulb or energy-saving lamp