Taidacent Touch Sensor Switch for Bathroom Mirror LED Light Capacitive Touch Light Switch 12V24V Bathroom Smart Glass Capacitance Sensor Module

Product Description

Description

Special touch switch ON/OFF for mirror lamp (for energy saving lamp, light tube, LED)

Parameter

Product name 12- 24V mirror touch switch Total power ≤50W Input voltage DC12- 24V Shell size 57*57*high 11MM Touch type Capacitive Backlight color Standby red/lit blue Bus length about 220MM Material PC flame retardant Fixed way Tear off the double-sided adhesive and paste the glass Gross weight 25.5g Scope of application Mirror glass etc. Penetration distance 5MM thickness Load type LED lamps and various household appliances

Size

Wiring

The black wire (negative) and the red wire (positive) are connected to DC12-24V input,

The red wire (positive pole) and blue wire (negative pole) are the output connection lamps.

Features

This switch is an isolated touch sensor switch, which is suitable for all kinds of lamps with medium (such as glass, acrylic, plastic, ceramic, etc.) lamp body. In the case of isolation protection, it does not need to touch the metal parts through the glass. The inductive trigger switch works, realizes the touch function, and has high safety performance. The switch is made of inorganic material or wear and has a long life. After the switch is installed, the switch accessories can not be seen on the front of the mirror, but the touch logo revealed by the backlight. It is beautiful and generous. It is the first choice for making high-end products.There is a background light on the touch switch board. The background light and the touch switch are designed as a whole. When the power supply and the switch are connected, the background light on the switch board will light up after the power is turned on, and the background light will be on. Conventional lights are on, red, off and blueTouch switch function: one on and one off Model: TQ-301KIt can ensure the safe use of electricity for users, and has a surge absorber, which can effectively prevent the outside world and the interference to the outside world.Suitable for all kinds of lamps with medium (such as glass, acrylic, plastic, ceramic, etc.).Wiring mode: the black wire and the red wire are connected to DC12V-24V input, the other red wire and blue wire are output to the light source, and the black touch head is installed on the back of the mirror.

Installation steps:

Note: Please cut off the main power switch before installation.

•Connect the black wire and red wire to the power input on the switch, and the other set of red wire and blue wire is the output to the light strip.

• Design a touch point on the mirror surface. The size of the touch point is 15-20mm. First, remove the mercury around the lens touch point. The width of the removed mercury is preferably 1.5-2CM. The removed mercury part is just backlit. Clearly, you can see the touch position at a glance, which is beautiful and easy to find the touch switch position.

• When installing the switch, make a center cross line on the touch point. There are three arrow lines on the switch box. The three arrow lines should be aligned with any three lines of the cross line on the touch point, (because the center of the touch switch board has a diameter of 10mm The position is the touch sensing area, so you must align the touch sensing area on the touch switch board with the touch point of the mercury part of the mirror), and you can touch it after aligning it. The touch frame comes with glue and glue. There is a sticker on the surface, remove the sticker, and stick the alignment position on the lens to mark the position. There are 3 points on the bracket to align the center point of the mark, and then put the switch in. It is OK to test the switch after sticking it. To ensure that it will not fall off permanently, you can fix the bracket with glass glue.

Working voltage: DC12-24V
Load type: LED lamps and various household appliances
Load power: ≤50W
Touch head: 50X34X10mm
This switch is an isolated touch sensor switch, suitable for all kinds of lamps with medium (such as glass, acrylic, plastic, ceramic, etc.)