5pcs HC-SR501 PIR Infrared Motion Sensor Human Body IR Movement Detector Sensor Module for Arduino for Raspberry Pi
$9.49
Product description
HC-SR501 PIR Motion Sensor
Human Body Pyroelectricity Infrared PIR Motion Detector Sensor Module
Operating voltage range: DC 4.5-20VQuiescent Current: <50uATrigger: L can not be repeated trigger/H can be repeated trigger (Default repeated trigger)It has pin header to select trigger modeDelay time: 0.5-200S (adjustable) the range is (0.xx second to tens of second)Block time: 2.5S (default)Can be made a range (0.xx to tens of seconds)Board Dimensions: 32mm*24mmAngle Sensor: <100 ° cone angle Lens sizeHC-SR501 Sensor Diameter: 23mm(Default) Usage
This PIR motion sensor can automatically and quickly open various types of incandescent, fluorescent lamps, buzzer, automatic doors, electric fans, automatic washing machine and dryer Machines and other devices, it is a high tech products.
Especially suitable for enterprises, hotels, shopping malls, warehouses and family aisles, corridors and other sensitive Sense of region, or for the security zone automatic lighting, lighting and alarm systems. Also, it can work with Arduino or Raspberry Pi projects.You can use these sensors to connect lamps at home as well.
Package Included: 5 X Stemedu HC-SR501 PIR Infrared Motion Sensor
Adjustable Delay Time
With induction blocking time (default setting: 3-4 seconds): After each induction output (high level to low level), the induction module can set a blocking time immediately, and sense in this time period The device does not receive any induction signal. This function can realize the interval work (induction output time and blocking time), and can be applied to interval detection products; at the same time, this function can effectively suppress various interferences generated during load switching.
Features
1. Fully automatic induction: When someone enters its sensing range, input high level, and when people leave the sensing range, it will automatically delay and turn off high level. Output low level.2. Photosensitive control (optional): The module has a reserved position, which can be set for photosensitive control, and does not sense during the day or when the light is strong. Photosensitive control is an optional function, and no photoresistor is installed at the factory. If necessary, please purchase the photoresistor separately and install it yourself.3. Two trigger modes: L can not be repeated, H can be repeated. It can be selected by jumper, the default is H.A. Non-repeatable trigger mode: After the high level is sensed, the output will automatically change from high to low as soon as the delay time ends.B. Repeatable trigger mode: After the induction output is high, during the delay time, if there is a human body moving within its sensing range, its output will remain high until the person leaves. The delay will be high. The level changes to a low level (the sensing module will automatically extend a delay time period after detecting each activity of the human body, and the time of the last activity is the starting point of the delay time).4. Micro power consumption: 65 microamps of quiescent current, especially suitable for electrical products powered by dry batteries.
Instructions for use
1. After the induction module is powered on, there is an initialization time of about one minute, during which time the module will output 0-3 times at intervals, and enter the standby state after one minute.2. Try to avoid interference sources such as lights directly on the lens on the surface of the module, so as to avoid introducing interference signals and causing misoperation; try to avoid the use environment The wind will not flow, and the wind will also cause interference to the sensor.3. The sensing module adopts a dual-element probe. The window of the probe is rectangular. The dual elements (A-element and B-element) are located at both ends of the longer direction. When the human body walks from left to right or from right to left, the infrared spectrum reaches the dual element. There is a difference in the time and distance of the sensor. The larger the difference, the more sensitive the sensor. When the human body walks toward the probe from the front or from top to bottom or from bottom to top, the dual element cannot detect the change in the infrared spectrum distance, no difference Therefore, the sensor is not sensitive or does not work; therefore, when installing the sensor, the direction of the dual element of the probe should be as parallel as possible to the direction where the human body moves the most, so as to ensure that the human body is sensed by the dual element of the probe when it passes by. In order to increase the sensing angle range, this module uses a round lens, which also makes the probe sense on all sides, but the left and right sides are still larger than the upper and lower directions, and the sensitivity is stronger. The installation must still follow the above requirements as much as possible.
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
—
4.8 out of 5 stars 5
4.4 out of 5 stars 33
—
4.5 out of 5 stars 2
—
Price
— no data
$44.98$44.98 $24.98$24.98 $55.99$55.99
— no data
$48.99$48.99
Interface
Type-C Type-C Type-C Type-C Type-C Type-C
Package includes 1
2 x 0.96″ OLED WiFi Lora ESP32 Type-C (V3) Board 2 x 0.96″ OLED WiFi Lora ESP32 Type-C (V3) Board 1 x 0.96″ OLED WiFi Lora ESP32 Type-C (V3) Board 2 x 0.96″ OLED WiFi Lora ESP32 Type-C (V3) Board 2 x 0.96″ OLED WiFi Lora ESP32 Type-C (V3) Board 2 x 0.96″ OLED WiFi Lora ESP32 Type-C (V3) Board
Package includes 2
2 x 868MHz 915MHz GSM IPX IPEX 1.13 UF.L Lora Antenna 2dBi 2 x 868MHz 915MHz GSM IPX IPEX 1.13 UF.L Lora Antenna 2dBi 1 x 915MHz U.FL IPEX to SMA Lora Antenna 2dBi 2 x 868MHz 915MHz GSM IPX IPEX 1.13 UF.L Lora Antenna 2dBi 2 x 868MHz 915MHz GSM IPX IPEX 1.13 UF.L Lora Antenna 2dBi 2 x 868MHz 915MHz GSM IPX IPEX 1.13 UF.L Lora Antenna 2dBi
Package includes 3
2 x Case for Lora ESP32 Type-C Board Terminal wire for lithium battery + pin header Terminal wire for lithium battery + pin header 5 x 915MHz U.FL IPEX to SMA Lora Antenna 2dBi 2 x Case for Lora ESP32 Type-C Board 5 x 1 Slot 18650 Battery Holder Case
Package includes 4
2 x 915MHz Antenna 5DBi SMA Male Omni-directional antenna no data
no data
Terminal wire for lithium battery + pin header 2 x 915MHz Antenna 5DBi SMA Male Omni-directional antenna Terminal wire for lithium battery + pin header
Package includes 5
Terminal wire for lithium battery + pin header no data
no data
no data
Terminal wire for lithium battery + pin header no data
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
3.3 out of 5 stars 18
4.7 out of 5 stars 25
4.4 out of 5 stars 30
4.1 out of 5 stars 62
4.1 out of 5 stars 181
4.7 out of 5 stars 42
Price
$27.90$27.90
— no data
$9.98$9.98 $9.98$9.98 $8.98$8.98 $19.98$19.98
Product name
ESP32 Capacitive Touch Screen 3.5″ Yellow Display Module ESP32-3248S035C BT+WiFi Development Board ST7796 ESP32-WROOM-32 with Integrated Display 480×320 TFT 3.5 inch for Arduino IDE 600PCS/BOX 1/4W Metal Film Resistor Assortment Kit, 1% Resistors Assorted Set, 10 Ohm-1M Ohm Resistance Pack 240pcs Multicolored Dupont Cable 20cm 10cm Breadboard Prototyping Wires Kit 3PCS LM2596 DC to DC Buck Converter 4-40V to 1.25-37V Adjustable Voltage Regulator Step-Down Module with LED Voltmeter Display 3A 5PCS RCWL-0516 RCWL 0516 Microwave Radar Sensor Human Sensor Body Sensor Module Induction Switch Module Output 3.3V ESP32 Touchscreen 2.8inch TFT LCD Display ESP-WROOM-32 ILI9341 Resistive Touch Module 240 * 320 ESP32-2432S028R Bluetooth WiFi Dual Core Development Board
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
3.8 out of 5 stars 16
4.8 out of 5 stars 16
4.2 out of 5 stars 40
4.5 out of 5 stars 9
4.8 out of 5 stars 23
4.3 out of 5 stars 44
Price
$32.99$32.99 $9.99$9.99 $8.98$8.98
— no data
— no data
$5.98$5.98
Product
60KG Digital Servo Large Torque Steering Motor Stainless Steel Metal Gear RC Servo High Speed 0.13sec/60 Degree at 8.4V for Robotic & 1:5 RC Car (Control Angle 270 Degree) 2/3/4 x 1.5V AAA Battery Holder Case with Wire Leads, 6PCS AAA Battery Box with ON/Off Switch, 5PCS 9V I Type Hard Shell Snap Battery Clip Buckle Lead Wire (Pack of 11) 5PCS Capacitive Analog Soil Moisture Sensor Module 3.3~5.5V Corrosion Resistant Humidity Detection Sensors DIY Electronic 3pcs AIP31066 1602 LCD Display Module with Blue Backlight 51 Learning Board LCD1602 16×2 LCM Characters LCD for Ar-duino 42PCS Solderless Double-Sided Protoboard Universal PCB Board Prototype Kit Electronic Breadboard with 6 Sizes (2×8 3×7 4×6 5×7 6×8 7x9cm) for Arduino DIY Project 5PCS Wire Lead Battery Storage Box Case Holder for 18650 Button Top Single Battery
HC-SR501 Delay Time: 0.5-200S (adjustable), the range is (0.xx second to tens of second), the delay time can be adjusted by using the potentiometer on the HC-SR501 motion sensor.
Operating voltage range: DC 4.5-20V; Quiescent Current: <50uA; Trigger: L can not be repeated trigger/H can be repeated trigger (Default repeated trigger)
Automatically and quickly turn on home devices by detected HC-SR501 motion sensor.
HC-SR501 motion sensor is an economic hightech products. It is widely used.
Angle Sensor: <100 ° cone angle Lens size
Customers say
Customers find the PIR sensor easy to set up and appreciate its quality. However, the functionality receives mixed feedback, with some saying it works well while others find it totally unreliable.
There are no reviews yet.