8″ x 8″ Duct Hole [9.6″ x 9.6″ Face] Aluminum 1-Way Vent Cover: Adjustable Curved Blade Air Supply Diffuser – Plastic Seal for Tight Fit, Quiet Air Flow, Multi-Shutter Damper

Product Description

Grille 8″ x 8″ [8 x 8 Duct hole] [9.6 x 9.6″Face]

With this product the hole must measure 8″ x 8″ to fit.

The duct hole is the opening in the wall or ceiling or where the grille will go.Always measure the width first follow by the height to make sure you buy the correct grille. [8 x 8 Duct hole] [9.6 x 9.6″Face]

MEASURE THE DUCT OPENING BEFORE PURCHASING

Always measure the wall or ceiling opening to determine which size you should order
IMPORTANT: Do not measure your old grille. After removing your grille from the opening, measure the width followed by the height. Each grille has a front end frame which wil overlap at sidewall or ceiling joining. The total outer size of this grille is 9.6″ W X 9.6″ H. Purchase a new grille that matches the measurements of your duct opening.

Step 1.

Before you star the first step, you will need from home a screwdriver or drill, meter, pencill and all the security accesories. If you do not have the hollow opened, you need the tools to open it (depends on the material of the ceiling). 1. If you have the hollow, do not open the product bag in case you need to change it. first measure the hollow width by height and make sure that the hollow size is the same as the diffuser size that is on the bag label, to make sure that you bought the correct diffuser size. if you do not have the hollow, Measure and draw the size of the HOLLOW on the ceiling WITH the diffuser SIZE that is on the bag label wich is equal to THE diffuser NOMINAL SIZE. all the sizes are the width by the height in inches, please always measure the width first follow by the height to make sure you buy the correct diffuser.

Step 2.

Before you star the second step, make sure to open the product, removed it from the plastic bag, removed the cardboard corner that protect the diffuser corners, and get the screws that are included. 2. PLACE THE Diffuser IN THE hollow, secure it to the ceiling by inserting the screws into each hole that has the diffuser in the frame, using the screwdriver or drill. Do not tighten the screws until you do step three.

Step 3.

3. Before tightening the screws, ALIGN THE PRODUCT HORIZONTALLY AND VERTICALLY TO MAINTAIN THE PARALLELISM WITH THE OPEN HOLE. Once you ensure that the diffuser is aligned, tighten the screws well using the screwdriver or drill to prevent it from falling.

Step 4.

4. Once the diffuser is installed, open the diffuser blades manually one by one, and then open the damper with the lever. Take notice, that the diffuser blades are used to control de air direction and the damper blades to control the airflow.

MEASURE THE DUCT OPENING IN THE CEILING BEFORE ORDERING YOUR GRILLE

Ceiling Opening Size = Listed Size Each grille has a front end frame which wil overlap at ceiling joining. Install the grille

Once you have received your purchase simple you have to install the grille with the screws provided and lock it on the sizes to leave it into place.

Always measure the ceiling opening to determine which size you should order

Installing your grille it’s really simple, always measure the width first follow by the height to make sure you buy the correct grille.

If the hole on the ceiling is 8″W x 8″H please order the 8″ x 8″ size option.

Make sure you buy the correct grille

Do not measure your old grille.

Ceiling Opening Size 8″ x 8″ = Listed Size 8″ x 8″.

Grille dimensions are based on the size of the duct hole dimensions of ceiling opening that should be according to your grille size.

L-CL 1 8 x 8 SUPPLY / DIFFUSER

Ceiling

1 way air flow supply: Injection or supply of air is done on 1 way, forward or back. Allows vertical or horizontal control over the airflow

CEILING SUPPLY DIFFUSER: IT CAN BE INSTALLED ON CEILINGS, DROP CEILING PANELS OR DRYWAL. ITS USE IS DOMESTIC AND COMMERCIAL,

Premium aluminum. Never rust.

Extruded aluminium construction, ALUMINUM AA6063. Rust free high grade aluminum, making the diffuser strudy, light and easy to install.

Adjustable curved blades.

Multi-Shutter Parallel Blade damper allowing for airflow adjustment with full unrestricted air control

Parallel curved blades: The Adjustable parallel blades allow to graduate the air diffusion.

THE ADJUSTIBLE PARALLEL BLADES ALLOW TO GRADUATE THE AIR DIFFUSION in 1 way

White powder coating finish.

Coated in High-resistance electrostatic white paint finish. Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant.

Our warehouse is located in Miami, Fl.

OUR PRESENCE

USA Mexico Canada Central America Colombia Peru Chile Ecuador

GRILLES AND DIFFUSERS FOR HVAC

ABOUT US

Laminaire is a Colombian company that was created in 1984, initially as a manufacturer of grilles, diffusers, and accessories for the HVAC market (heating, ventilation, air conditioning).

We are a great alternative for architecture and construction projects that seek to innovate. Our portfolio offers comfort solutions in modern buildings in an environmentally sustainable way We are a company that supplies products for the environment and comfort, as a company we are simply the best.

OUR NEW PROJECTS

Pacifica Center Ecuador Building

Product installed: L-RA and L-VH grilles, L-JS diffusers.

The Towers Building – Panama

Product installed: Linear slot diffusers.

Warehouses H&M Cali Colombia

Product installed: A / C grilles in commercial warehouse.

Addison House Store – Panama

Product installed: linear diffusers and return grilles.

[Proper Sizing First]: Measure your ceiling opening at exactly 8″ x 8″ before purchasing. The visible face measures 9.6″ x 9.6″, ensuring a perfect fit and smooth finish after installation.
[Easy Installation]: Installs easily on ceilings, drop ceiling panels, or drywall. Ideal for both domestic and commercial applications, serving as the perfect ceiling diffuser or ceiling vent cover.
[Screws Included]: Comes with galvanized steel cross-head screws (5/32″ diameter x 1 1/2″ length, white head) designed for wood and drywall. Suitable for heater vent covers or heat vent covers.
[Not For Floor or Exterior Use]: Specifically designed for indoor ceiling applications only. Not intended for flooring or outdoor installations.
[Semi-Matte White Finish]: Features a semi-matte Laminaire W finish (similar to RAL 9003), ensuring a modern, subtle aesthetic that complements any interior décor.
[Lightweight Design]: The diffuser’s lightweight construction prevents it from sagging or becoming dislodged over time, maintaining a secure and stable fit.
[Rubber Gasket Included]: A rubber gasket lines the perimeter of the hollow, preventing air leaks and optimizing HVAC system efficiency.
[Reinforced Corners]: Internal reinforcements behind the unions prevent the corners from separating, ensuring long-term structural integrity.
[Curved Blade Airflow Control]: Front blades shape the airflow and should never be fully closed. For lower ceilings (up to ~12ft), set up to 45°; for higher ceilings, open beyond 45° for broader air diffusion.
[Damper for Air Volume Only]: The damper controls air volume, not direction. Open it fully and gradually close until achieving the desired airflow, ensuring comfort without altering air direction.