4pcs Digital Temperature Controller XH-W3002 LED Thermostat Switch 12V Temperature Relay Switch Module Programmable Minus 50 to 110 Degree Heating Cooling Thermostat

Product Description

XH-W3002 Digital Temperature Controller

Embedded CPU Chip (MCU)Lower Power ConsumptionAutomatic Power Set MemoryStability, Consistency and Reliability

NTC10K Waterproof Probe

Equipped with NTC10K Waterproof Probe which Allows to Control the Temperature Even of Fluids,Allowing the Controlled Heated or Cooling

XH-W3002 Digital LED Temperature Controller Module

Specification:

Main material: ABSOutput: 10A(Max)Temperature Measurement Range: -50~110℃Temperature Control Range: -50~110℃Measurement Accuracy: +/- 0.2℃Control Accuracy: +/- 0.1℃Output Power: 1500W (MAX) Output Type: Direct output (input/output synchronization)Installation Hole Distance: 73mm / 2.87in(aperture 4mm/1.73in)Item Size: 6 * 4.5 * 3.1cm / 2.36 * 1.77 * 1.22inPackage Included: 1pcs XH-W3002 Temperature Controller

Parameter Table:

P0: Set Start TemperatureP1: Set Stop TemperatureP2: Set Temperature Calibration (Detect Temperature + Corrected Temperature = Actual Temperature)P3: Set Delay StartPress the Setting Button, Use the Up or Down Button to Set Delay Time( Minutes )888: Power on, Press the UP and DOWN Buttons at the same time more than 3 seconds, Restore Factory SettingLLL: In Use, Means Sensor is FaultHHH: In Use, Means the Temperature is Above the RangePress the Setting Button, Enter the Internal Menu. Press the Up and Down to Switch Setting Parameter

How to Set:

How to Set the Startup Temperature:

Press the Up Button Once and Display the Start TemperaturePress and Hold the Up Button for About 3 Seconds,Then Startup Temperature Flashed

How to Set the Stop Temperature:

Press the Down Button Once and Display the Stop TemperaturePress and Hold the Down Button for About 3 Seconds ,then Stop Temperature Flashed

How to Restore the Factory Settings:

Under the Condition of Power On,Press and Hold the Up and Down Button at the Same Time,the Dispaly will Show 888 and Then Perceive Current Temperature Automatically,The Factory Setting have been Restored

XH-W3002 Digital Temperature Controller: Temperature Control Range: -50-110°C; Control Accuracy: 0.1 °C; Input Power: DC 24V; Output Power: 240W(MAX); Output: 10A (MAX)
High Quality: XH-W3002 Digital Temperature Controller Designed with ABS Material Shel,Exquisite and Beautiful, 1.8mm Ultra-Thick Design,High Mechanical Strength, Good Electrical Performance
Easy Operation:With 3 Buttons: to Set Start Temperature, Stop Temperature, Corrected Temperature, Delay Start Time; LED Indicator Light: Display the Current Output Status; Digital Display Tube: Shows Measuring Temperature, High Accuracy of Temperature Measuring and Controlling
Two Work Mode: Heating ( Start Temperature is Less Than Stop Temperature), Cooling ( Start Temperature is Above Than Stop Temperature) It is Precise and Reliable with Good Long-Term Stability. With Fixing Screw Hole, Convenient for Install and Fixed. Small Size,Low Power Consumption, Fast Response
Application: XH-W3002 Digital Temperature Controller Can be Widely Used for HVAC, Dehumidifier, Test and Test Equipment, Automobile, Automatic Control, Weather Station, Humidity Regulator and Other Related Temperature Detection and Control