NEWACALOX Hot Air Rework Station 500°C Soldering Station with Hot Air Gun, Airflow Adjustable, Desoldering Station for BGA IC, SOIC CHIP, QFP, PLCC, etc.
$58.99 $69.99
Product Description
Our products 858D use the brush-less fan,and long life and low noise.It is very good for shielding box and PCB.Please read this operating instruction manual carefully before using the serial products of our company.Thank you!
Specification:
Power Voltage: 110V
Plug type: US
Power consumption:700W
Blower fan: Brushless Fan
Amount of Wind:120L/m(MAX)
Temperature Range:100℃-500℃
Discharge Feature：LED indicator light
Handle Length :120cm
Noises :<45db
Weight:1.8KG/3.97LB
Operation Instruction
1. To put unsoldering equipment ready, and take off the handle from the holder.
2. To turn on the power.
3. To set the best nozzle(large caliber nozzle preferred)
4. To switch on the power, the screen displays”—-”, it represents standby mode.
5. To press ↑ or ↓ button(revolving switch) to set up the temperature.
6. To turn the airflow power adjusted switch to set up the required wind speed.
7. To hold the handle, so the equipment begins to heat. To adjust the revolving switch of airflow in order to select suitable airflow, and the station can be operated normally while the temperature is stable.
8. Please put the handle back on the holder when you stop working; meanwhile, the heat gun handle will cool down automatically.
While the temperature is lower than 100℃, the screen displays “—-”, it stands for switching to standby mode, and after the temperature of Heating element is less than 70℃, the equipment is on standby(If there is airflow out, it means the temperature is higher than 70℃; and there is no airflow only after the temperature is lower than 70℃).
9. To turn off the power and unplug if there is no operation for a long period of time.
Hot air gun connector
Note: The correct insert way is groove upward.
1,2 :hole-sensor
3 hole: magnet switch
4 hole: ground lead
5,6 hole: heat gun
7,8 hole: heating stuff
Jacks need to be one-to-one to avoid grounding failure
Hot air gun
Strong power brush-less fan, stable wind supply Unique designed to, prevent hot air return
Cautions: Try to set up the temperature as lower as possible and the airflow as much as possible as to keep the heating element working longer and protect IC chips.
HSS heat gun nozzles
replaced plug
HSS nozzle
Warm Up Quick: This 858D microcomputer controlled soldering station quickly heats up to the set temperature within 3-5 seconds. The highest temperature is 500 ° C
Digital LED Display: Unique Rework Station With digital LED display, high performance, temperature stabilization and airtightness. Use the brushless fan, long life and low noise
Automatic Cooling Function: can effectively extend the life of the heater and protect the heat gun. This is safer for the user. It also has a memory temperature function: Turn off the 858D rework station at a certain temperature. If you turn it on, it will quickly heat up temperature
Accurate Temperature Control: Remove BGA IC safely, keep pins intact. Much safer and more reliable. Blowing PCB will not blow it
Much safer and more reliable. Blowing PCB will not blow it off Indispensable product for repairing mobile phones, laptops, PCBs, etc. Suitable for soldering multiple components such as SOIC CHIP QFP PLCC and BGA etc. (especially for flat cables and cable connectors)
Customers say
Customers find the soldering station works well for SMD rework, heats up quickly, and comes with a spare heating element. The tool is easy to use and setup, with consistent air flow and decent included tools. They appreciate its build quality and consider it excellent value for money, with one customer noting it remains functional after two years of use.
There are no reviews yet.