Sense Energy Monitor – Track Electricity Usage in Real Time and Save Money – Meets Rigorous ETL/Intertek Safety Standards
$299.00
Product Description
Monitor Your Home’s Energy Use in Real Time, from Anywhere
Real-Time Readings
The Power Meter tells you exactly how much electricity you’re using right now, with wattage steps up and down when devices turn on and off.
Dashboard
See your energy usage month-to-date and what you’re trending towards.
Notification
Set device-level notifications. Set alerts for when the garage door opens, when the sump pump turns on, when the dryer’s done, or the iron has been on for a long time.
Always On
Identify sources of energy waste. Find energy hogs, identify vampire loads, and see how much they’re costing you.
Usage
Track usage over time. Set goals and monitor your progress through the month to make sure you stay on track.
Carbon Intensity
Provides real-time carbon intensity data to help you reduce your footprint.
Track Time-of-Use Rates
If you’re on a Time-of-Use rate plan, you can input your rate zones for more accurate billing and historical costs. You can even set push notifications to alert you when entering peak zones.
Installation
Installing Sense is a straightforward process that generally takes a licensed electrician less than 30 minutes to complete. Two sensors clip around the service mains that connect your electrical panel to the grid.
Monitor Two Circuits Directly
In addition to Sense’s machine learning device detection and smart plug integrations, you can monitor up to two 120V or 240V circuits directly with dedicated circuit monitoring. Using optional locking Flex add-on sensors, it’s perfect for large loads and critical devices like your HVAC system, EV charger, or variable speed pool pump.
Add to Cart
Add to Cart
Customer Reviews
3.6 out of 5 stars 365
4.0 out of 5 stars 3,043
3.8 out of 5 stars 867
Price
— no data
$299.00$299.00 $349.00$349.00
What is it?
Our most comprehensive energy monitoring system for non-solar homes Our base model for non-solar homes For homes with solar
What’s included?
Includes two sets of sensors; one set to monitor your main energy, and a second set to monitor one of the following in the list below: Includes one set of sensors to monitor your energy Includes two sets of sensors; one set to monitor your main energy, and a second set to monitor your solar system
Dedicated Circuit Monitoring
Yes No No
Generator support
Yes No No
400A split-service
Yes No No
Solar
No No Yes
Monitor Compatibility and Specs
Where does Sense work? The Sense monitor will work in your home if it has a split-phase 120/240V or a 400A split-service residential panel with individual panels up to 200A. It is compatible only with electrical panels in the United States and Canada. Installation Requirements Installation of the Sense monitor requires a 240V circuit breaker to measure voltage on each phase. The Sense monitor consumes less than 5W. Sense should always be installed by a licensed electrician. Space Requirements You must have enough space to fit sensor clamps with HxWxD dimensions of 3.72″ x 2.3″ x .433″ (94.49 x 58.50 x 11mm), and an inside diameter of 1.565”. Sensor cables are 46″ (116.84cm) long and the power cable is 36″ (91.44cm) long. Cable extensions may be purchased separately. Wireless Specifications 802.11 b/g/n 2.4 GHz WiFi – Bandwidth Use: ~300 MB/day Environmental Ratings Relative Humidity: < 90%; IPX0 rating, no water ingress; Temperature: 32-154ºF (0-68ºC); Elevation: < 6562′ (2,000m) Locking Sensors Newer monitors are equipped with locking sensors that fit most standard and main breaker meter combo panels. Please contact Sense customer support if you receive non-locking sensors and need locking sensors. After confirming panel configuration, Sense will send a complimentary set of locking sensors. Flex Add-on Sensors Only one set of Flex add-on sensors can be installed with a Sense monitor. Flex add-on sensors use the port reserved for solar monitoring. You may need to punch out the cover to the port to access it.
SENSE SAVES: Sense saves you energy and money by providing insights into your home’s energy use and activity. NOW SUPPORTING TIME-OF-USE RATE PLANS.
SEE WHAT’S UP. KNOW WHAT’S ON: Track how much electricity you’re using, what time your kids got home, or when someone leaves the basement light on. Sense identifies patterns in your energy use to help your family be more efficient, informed, and secure.
MONITOR YOUR HOME’S ENERGY USE FROM ANYWHERE: Real-time data through our iOS, Android, and web apps.
AVOID DISASTER: Set custom notifications for critical devices, like your sump pump, well pump, or flat iron.
MEETS RIGOROUS SAFETY STANDARDS: Sense’s components and system have been designed and ETL/Intertek certified for installation and operation inside the electrical panel. Sense is not currently available or compatible outside the United States and Canada.
Customers say
Customers find the energy monitor’s functionality and real-time power consumption tracking effective, with the app working well and providing insights and tips. The device is simple to install and helps optimize energy use, with some customers reporting savings of over $1000. However, customers have mixed experiences with device identification and value for money – while some say it’s worth the investment, others find it expensive. Additionally, connectivity issues are a concern, with customers reporting problems maintaining Wi-Fi connection and the device losing signal frequently.
There are no reviews yet.