Zooz 700 Series Z-Wave Plus On/Off Toggle Switch ZEN73, White | Direct 3-Way (No Add-On Switch Needed) | Z-Wave Hub Required

NOTE: Do NOT connect this switch to ceiling fans, motors, or home appliances
NEUTRAL WIRE REQUIRED

SPECIFICATIONS:

• Model Number: ZEN73 800LR
• Z-Wave Region: US/CA/MX
• Power: 120 VAC, 60 Hz
• Maximum Loads: 150W LED, 600W Incandescent, 8A Resistive
• Z-Wave Range: Up to 300 feet line of sight (no walls or obstructions)
• Operating Temperature: 32-104° F (0-40° C)
• Installation and Use: Indoor only

Will it work with my smart speaker?
You smart speaker is not a Z-Wave controller so you will need a compatible Z-Wave hub to control this switch with voice commands.
Smart speaker compatible Z-Wave hubs include:

• Fibaro Home Center Lite
• Hubitat
• Compatible with SmartThings (Aeotec Smart Home Hub)
• Home Assistant (Z-Wave JS)
• Ring Alarm

FAST WIRELESS AND LOCAL CONTROL: Manual or remote on/off control from your mobile device or computer (when included to a Z-Wave gateway controller – sold separately. Smart speakers are NOT Z-Wave hubs). Reports status instantly.
NEW SIMPLE DIRECT 3-WAY: Patented solution for 3-way and 4-way installations! No add-on switch needed, no need to rewire the other boxes. Just wire the ZEN73 switch in the box with direct connection to power (it needs to replace an existing 3-way switch) according to the appropriate diagram. Works with mechanical 3-way switches as long as NEUTRAL is present.
NEW 700 SERIES MODEL: Just 1.1″ deep to easily fit in crowded and shallow boxes. 700 series Z-Wave chip for faster response time and better wireless range boosted by optimal antennae positioning. Remembers and restores on/off status after power failure. Do NOT use as direct replacement for the ZEN23 model in 3-way set-ups, always follow the wiring in the manual.
WORKS WITH YOUR HUB! Based on the universal binary switch command class – supported by most Z-Wave controllers (does NOT work directly with smart speakers). Lifetime tech support and 5-year extended warranty once registered.
CHECK YOUR WIRING FIRST: Neutral wire is required to complete installation! Do NOT use the ZEN73 model as direct replacement for the older ZEN23 or ZEN24 switches – they wire differently in multi-point control set-ups, always follow the appropriate diagram or ask Zooz for help.